Hibbs Chisel
9-1/2″ (24.0 cm) Hibbs Chisel is designed to scrape away and through bone to allow access to the surgical field. This chisel is designed to cleanly and effectively make cuts in bone without causing splintering and damage to surrounding areas. This instrument features a strong geometric shaped handle that tapers into a narrow neck and widens again to create a chisel head. The chisel also features a sharpened end for increased effectiveness in bone manipulation. This instrument is available in ten different sizes ranging from 6.0 mm to 38.0 mm making it well suited for use in small delicate areas as well as in larger bony areas.
Description
| Name | Hibbs Chisel |
| Lead Time | Lead time advised within 48 hours of order placement. |
| Specialty | Neuro, Ortho & Spine-Chisels & Gouges |
| Material Finish | Stainless Steel |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | The Century Instruments |
| Sterility | Non-Sterile |
| Usage | Reusable |
Reviews (0)
Shipping & Delivery
Related products
Cherry Osteotome
octagonal handle, 8" (20.0 cm) Cherry Osteotome is designed for use in cutting and preparation of bone in neurosurgical procedures. This osteotome has a long, slender profile as well as a uniquely designed octagonal handle which allows it to be gripped and maneuvered easily. Additionally this osteotome is available in five widths 3.0, 4.0, 5.0, 6.0 and 7.0 mm and in either a straight or curved profile making it suitable for a wide variety of patient needs and surgical approaches.
Cobb Spinal Gouge
hexagonal handle, 9-1/2" (24.1 cm) Cobb Spinal Gouge is a specially crafted instrument for use in spinal surgeries. This instrument features a solidly designed hexagonal handle which gives adequate area for gripping. The gouge is designed to be used in the close spaces of the vertebral canal and other areas encountered in spinal surgery to make holes or to scrape away at bone. It is available in four different styles: straight, medium curve, strong curve and reverse curve making it well suited for a vast array of surgical scenarios and satisfy any surgeon preference.
Cobb Spinal Gouges
round knurled handle, 11" (28.0 cm) Cobb Spinal Gouge is a specially crafted instrument for use in spinal surgeries. This instrument features a round knurled handle, these micro serrations allow for added gripping to prevent slipping during use. The gouge is designed to be used in the close spaces of the vertebral canal and around it to make holes or to scrape away at bone. It is available in four different styles: straight, medium curve, strong curve and reverse curve making it well suited for a vast array of surgical scenarios and satisfy any surgeon preference.
Dawson-Yuhl Gouge
7.0 mm, 11" (28.0 cm) Dawson- Yuhl Gouge is specially crafted for delicate work in bone manipulation. It features a 7 mm gouge that can be used to scrape along bone or with a mallet be used to create holes or splinter bone to gain access to the inside. Uniquely this instrument is available in two different styles, straight or bayonet, allowing the perfect fit for any particular surgical maneuver.
Lambotte Osteotome – W/Out Calibration Lines
w/ out calibration lines, 9" (23.0 cm)Lambotte Osteotome is specifically designed for uses such a bone cutting. This instrument is a flat metal piece that tapers on one end and is slightly curved out of the plane of the handle. Osteotomes have the added benefit of being operated manually and thus the pressure can be adjusted readily as cuts are created and continued through bone. Additionally this osteotome does not have calibration lines. It is available in a vast array of sizes ranging form 4.0 mm to 50 mm and in either a straight or curved profile making them well suited for a wide array of surgical scenarios and surgeon preferences.
Stille Osteotome
straight, 8" (20.0 cm)Stille Osteotome is crafted for use in neurosurgical procedures that require cutting or chiseling through bones. This osteotome features a chisel tip that can be used to scrape or sculpt bone. Additionally on the opposite end of the chisel affixed to the handle is a wide blunt end that can be hammered on to drive the chisel into bone. This instrument is available in eleven different widths ranging from 4.0 mm to 25.0 mm making it well suited for use in wide ranging procedures that require small modifications to skull bone or cuts through entire vertebrae.
Swan Neck Gouge
9" (23.0 cm) Swan Neck Gouge is an instrument designed for gouging or removing particular sections of bone. Additionally it can also be used as a chisel with increased force applied to it to split bone or to scoop out segments to increase access to the center. A unique feature of this particular gouge is the swan shaped curvature that allows it to access difficult to reach areas without obscuring the surgical field and keeping the handle out the plane of surgery.
U.S. Army Pattern Osteotome
6-1/4" (16.0 cm) US Army Pattern Osteotome is a versatile instrument for use in manipulating of bone. This osteotome features a straight profile and can be used to cut bone or to carve out small pieces to allow access to more difficult to reach areas. Additionally this osteotome is crafted with a chisel type blade that can be used to scrape, clean or sculpt bone for a variety of surgical procedures. This instrument is available in three sizes 6.0, 12.0 and 18.0 mm.
Reviews
There are no reviews yet.