Koch Stop & Chop Manipulator
angled shaft w/ 1.5 mm tip, 4-1/3″ (11.2 cm) Koch Stop & Chop Manipulator is a tool used exclusively for cataract procedures. The manipulator is used to facilitate the stop and chop technique, in which the lens nucleus is initially sculpted and then chopped into smaller pieces for extraction. The angled shaft aids in accessing the lens capsule.
Description
| Name | Koch Stop & Chop Manipulator |
| Lead Time | Lead time advised within 48 hours of order placement. |
| Competitor | ;MA778R;OP0924301;OP0924-301;FW4859;FW-4859;E0713;601108;60-1108;6011-08; |
| Specialty | Ophthalmology-Hooks & Manipulators |
| Material Finish | Stainless Steel |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | The Century Instruments |
| Sterility | Non-Sterile |
| Usage | Reusable |
Reviews (0)
Shipping & Delivery
Related products
Clayman-Jaffe Lens Manipulating Hook
9.0 mm shaft w/ 0.2 mm hook, angled 45 degrees, 4-3/4" (12.0 cm)s Clayman-Jaffe Lens Manipulating Hook is a commonly used tool during cataract procedures. The hook is used to manipulate the opacified native lens during a phacoemulsification procedure. The 45 degree angled hook is ideal for moving the lens into a desired position for removal.
Hirschman Iris Hook
0.75 mm hook, angled, 4-3/4" (12.0 cm) Hirschman Iris Hook is a commonly used tool during cataract procedures and operations needing access to the lens capsule. The 0.75mm hook provides fine control while retracting only a selected portion of iris tissue. A blunted tip assures minimal tissue damage to the surrounding globe.
Jaffe Lens Manipulating Hook
0.15 mm diameter, straight, 4-1/2" (11.5 cm) Jaffe Lens Manipulating Hook is a commonly used tool during cataract procedures. The hook is used to manipulate the opacified native lens during a phacoemulsification procedure. The thin shaft of the hook is meant to maximize control of the instrument while providing enough leverage to maneuver the lens into a desired position.
Maloney No-Hole Iol Manipulator
tear drop shape tip w/ post, 4-3/4" (12.0 cm) Maloney No-Hole IOL Manipulator is a useful tool for cataract procedures. The tear-drop shaped tip is ideal for manipulating the lens implant without risk of damaging or scratching. The extended working length allows the surgeon to maneuver the implant into the space desired.
Maltzman-Fenzl Lens Manipulating Hook
0.15 mm v-shaped tip, 4-3/4" (12.0 cm) Maltzman-Fenzl Lens Manipulating Hook is a commonly used tool during cataract procedures. The hook is used to manipulate the opacified native lens during a phacoemulsification procedure. The tip contains 2 prongs designed to cup the lens in a variety of positions. Both angled and straight models are available with the hook depending on surgical preference.
Nagahara Nucleus Chopper
1.25 mm tip & blade offset at 60 degree angle, round knurled handle, 4-1/2" (11.4 cm) Nagahara Nucleus Chopper is a commonly used tool in cataract extraction procedures. The chopper is used to divide the opacified nucleus into smaller pieces for eventual extraction. The instrument features a 1.25 mm tip with a 60 degree offset blade, aiding in visualization during incisions of lens tissue.
Shepard Iris Hook
1.0 mm, blunt, 4-7/8" (12.4 cm) Shepard Iris Hook is a commonly used tool in cataract surgeries. The hook is used to retract a portion of the iris tissue to gain access to the lens capsule. Often, multiple hooks are used at different positions around the iris and anchored, providing adequate visualization for lens removal. The hook features a blunt tip to minimize extraneous tissue damage.
Reviews
There are no reviews yet.